Fluorine silicon compounds

Specifications: 1L/5L/20L

Scope of application:

Applicable to various types of stone, such as granite, marble, sandstone, limestone, concrete, etc.

Product performance:

The product of fluorine silicon type full effect protective agent, which can effectively permeate to the stone wool stoma of 3-6 mm with a combination of stone formation of lasting waterproof, anti-fouling, prevent oil as one of the protective layer, a trace on the surface, stone material don't change color, does not affect the stone material permeability, wet stone wet face do not recommend using the product, suggest select stone model do a layer of protective agent added HY605 stone base interface agent.Can effectively prevent water, oil and all kinds of pollution from external invasion, has excellent aging resistance, ultraviolet resistance, oil resistance.When in contact with food products after curing, no toxicity, not harmful to human body.

Method:

1. The stone material must be dry, the stone surface is clean, keep the place well ventilated.

2. The protective agent directly with brush besmear to brush on the stone surface, crisscross full besmear to brush, shall not be omitted, brush after should have a certain amount of stone material surface protective agent for its absorption.Protective agent can handle per liter stone 8-30 square meters (depending on the absorption rate and the surface of stone material).

3. Under the protective agent of stone material, room temperature for 5 hours after a protective effect.Natural curing a week after the protective effect is best, 8 hours can not contact with rain.

4. When facing stone by wet method installation construction, floor unfavorable use HY805 influence (paste) bottom suggested protective stone varieties selection and the corresponding protective agent (HY105, HY205) waterproof impermeability, plus HY605 stone floor strength sealants or HY705 stone interface tackifier, can get the most protection.

5. This product is suitable for the construction temperature of 5 ℃ to 35 ℃.Summer construction should prevent stone floor excessive exposure, which leads to the surface temperature is too high (more than 50 ℃) otherwise, reagent rate rise caused by dry too fast, and prevents the coating permeability.

6. The original packing seal storage life two years, two years later after the test protective effect is the same, still can continue to use.

Note:

1. The high acid environment conducive to the product curing (stone after acid cleanser, must be the residual acid neutralization with sodium carbonate solution to neutral, or make the maintenance and failure).

2. Suggest to unfamiliar stone do small sample test, for at least 24 hours for the response.

3. Any contact with harsh chemicals and cleaning, may affect its useful life.

4. According to the inflammable material storage.

5. Keep out reach of children.

Emergency disposal:

1. The eyes rinse immediately with plenty of water after 15 minutes, and please accept the treatment of eye doctor.

2. The suction gas, please immediately transferred to the fresh air, and treated by doctors.

3. Please accept the doctor diagnosed after eating.

4. When in contact with skin, wash immediately with water and soap, please.

Production date: see the bottle