
Detailed information
Main component: water-based silicate
Scope of application: applicable to all types of exterior wall facades: such as red brick, concrete, tile, real stone paint etc.
Product performance:
This type of product is water-based and environment-friendly, suitable for all kinds of building exterior wall materials. It can effectively penetrate into the interior of the material without leaving traces on the surface and changing the color. The treated exterior wall material has good permeability, waterproof performance, prevents the growth of moss and mold, effectively prevents all kinds of water sources from seeping into the exterior wall, and prevents water seepage from the exterior wall.
Construction method:
1. The building materials must be dry, the surface of the building materials should be cleaned, and the construction site should be well ventilated.
2. Spray the protective agent directly on the surface of the building material with a brush or spray can, and apply it crosswise and fully or evenly without omission. The surface of the sprayed building material shall have a certain amount of protective agent for its absorption and penetration. Each liter of protective agent can treat 5-15 square meters of the surface of building materials (depending on the absorption rate and surface condition of building materials).
3. The surface of building materials treated with this protective agent will have protective effect after 5 hours at normal temperature. The protection effect is the best after one week of natural curing, and it shall not be exposed to rain within 8 hours.
Construction above 4.10 ℃. During summer construction, the surface of exterior wall building materials shall be prevented from excessive exposure to the sun, resulting in excessive surface temperature (above 50 ℃). Otherwise, the agent dosage will increase due to rapid drying, and the coating penetration will be hindered.
5. The sealed storage period of the original package is two years. After two years, the protective effect remains unchanged after the test, and it can still be used.
Special note: excessive painting may produce white crystals on the surface.
Attention:
1. The contact and cleaning of any harsh chemicals may affect its effective life.
2. Keep it out of reach of children.
Emergency disposal:
1. Rinse with plenty of water for 15 minutes immediately after entering the eye, and please accept the treatment of an ophthalmologist.
2. Please accept the doctor's diagnosis after ingestion.
3. In case of contact with skin, please wash immediately with water and soap.
Production date: see the bottle body.