
HY12 Special protective agent for artificial Stone
Main components: Fluorosilicon compound
Application:
Specially designed for artificial stones and products
Product performance:
This type of protective agent can effectively penetrate into the pores of artficial stone and fully combine with it to form a stone or affect the permeability of it. Durable protective layer with high level of solid content. The surface does not leave a trace, change the color of artificial The product can effectively prevent water and all kinds of pollution from the outside.lt had excellent acid and alkall resistance and can effectively prevent water spots, yellowing and other changes with excellent performance in anti-aging and anti-ultraviolet radiation. When the product ls In contact with food after curing.lt has no toxicity and will not be harmful to the human body.
Construction Method:
1.The artificial stone must be dry, the surface must be clean and the construction site must be well ventilated.
2.The protective agent is painted directly on the surface of artficial stone with a brush and should be fully brushed. After brushing, there should be a certain amount of protective agent for its absorption and penetration on the stone surface(lt is recommended to apply it again after the surface is dry). 5 to 20 square meters of stone can be treated per liter ofprotective agent (depending on stone absorbtivity and surface conditions).
3.The artificial stone treated by the protective agent has a protective effect after 5 hours at room temperature. After a week of natural conservation, the protective effect is the best and should not contact wth rain within 8 hours.
4.This product is not recommended in winter with a low temperature environment (below 5℃).Summer construction should prevent excessive exposure to the bottom of the stone in order to avoid high surface temperature (above 50C).Otherwise, excessive drying will lead to an increase in the amount of chemicals and hinder the penetration of the coating.5 The original packaging is sealed for two years. After two years, the protective effect of it remains unchanged and can continue to be used.
Precautions:
1.It is recommended to do small sample tests on unfamiliar stones and let them react for at least 24 hours.
2.Exposure to and cleaning of any harsh chemical may affect its effectiveness.
3.Products are stored as flammable products.
4.The product should be placed out of reach of children.
5.Anti-virus mask should be worn when spraying products. lt is strictly prohibited to use air compressor spraying and the sprayer should sprayer should be higher than the shoulder of the human body.
Emergency Treatment:
1.If the product accidentally enters the eye, rinse with a large amount of water for 15 minutes immediately and receive treatment from medical agency.
2.If you inhale decomposing gas, please immediately turn to fresh air and receive medical treatment.
3.Please accept the doctor's diagnosis after eating by mistake.
4.When the product contacts with the skin, please wash it with water and soap immediately.
Production Date:
See the bottom of the bottle.